Charge-transfer interaction of iodine with some polyamidoamines

The interaction of iodine as a sigma-acceptor with two derivatives of polyamidoamine dendrimers (donor), 1,8-naphthalimide polyamidoamine (PAM1) and 4-piperidino-1,8-naphthalimide polyamidoamine (PAM2) have been investigated spectrophotometrically at room temperature in chloroform. The results indicate the formation of two CT-complexes [(PAM1)I](+)I(3)(-) and [(PAM2)(2)I](+)I(3)(-) with molar ratios of 1:2 and 1:1, respectively. The formation of these two complexes are in good agreement with their elemental analysis, infrared measurements and photometric titration plots based on the characteristic absorption bands of I(3)(-) ion around 280 and 360 nm. Moreover the formation of triiodide ion, I(3)(-), in both of the two complexes was supported by measuring their spectra in the far-infrared region. Three characteristic bands are observed at 125, 110 and 75 cm(-1) due to nu(as)(I-I), nu(s)(I-I) and delta(I(3)(-)), respectively, with C(2v) symmetry.     

Synthesis of 3-hexahelicenol and its transformation to 3-hexahelicenylamines,diphenylphosphine, methyl carboxylate,and dimethylthiocarbamate

A nonphotochemical synthetic route to 3-hexahelicenol is reported. It involves a key [2+2+2] cycloisomerization of CH(3)O-substituted triyne that is readily available from 1-methoxy-3-methylbenzene and 1-bromo-2-(bromomethyl)naphthalene. Further functional group transformations led to 3-CO(2)CH(3), 3-NH(2), 3-PPh(2), and 3-SC(O)N(CH(3))(2) substituted hexahelicenes.     

Influence of two grinding methods on the uncertainty of determinations of heavy metals in atomic absorption spectrometry/electrothermal atomisation of plant samples

 Chemical analyses of trace elements are affected by relatively high analytical errors due to the different steps of the laboratory procedures: samples grinding, mineralisation and instrumental measurements. In the present communication, the influence of the grinding phase on the global uncertainty of Pb, Cd, Ni and Cr determinations in plant samples by the classical method of atomic absorption spectrometry/electrothermal atomisation (AAS-ETA) after dry ashing is quantified. Two grinding machines, a planetary mill with balls and jars of agate versus a stainless steel grinder were compared by analysing leaf samples of cucumber, strawberry, kiwivines, apple trees and grapevines from agricultural experimental plots under controlled conditions. Variance components due to the difference between grinding methods and experimental plots were estimated. Further, the simultaneous effects of the grinding methods on all considered metals have been evaluated by analysis of variance. With the stainless steel grinder, on average, higher levels of the considered heavy metals were obtained (up to 67% of the mean values). On average, the increments were similar for metals contained in steel (Ni and Cr) and those not contained (Pb and Cd). The true causes of these differences need further investigation to determine whether the higher metal detection is due to possible contamination, to a different grinding quality or to other reasons. Finally, the grinding methods did not seem to affect the combined uncertainty of the analyses. Received: 3 November 1997 · Accepted: 29 November 1997     

Asymmetric synthesis of [7]helicene-like molecules

[reaction: see text] A new approach to nonracemic [7]helicene-like molecules has been developed. Stereoselective Co(I)-mediated [2 + 2 + 2] cycloisomerization of aromatic triynes containing an asymmetric carbon atom produces [7]helicene-like scaffolds in diastereomeric ratios up to 100:0. This central-to-helical chirality transfer can be controlled by the absolute configuration at the asymmetric center and by the presence of carbon substituents.     

ESI outcompetes other ion sources in LC/MS trace analysis

Choosing an appropriate ion source is a crucial step in liquid chromatography mass spectrometry (LC/MS) method development. In this paper, we compare four ion sources for LC/MS analysis of 40 pesticides in tomato and garlic matrices. We compare electrospray ionisation (ESI) source, thermally focused/heated electrospray (HESI), atmospheric pressure photoionisation (APPI) source with and without dopant, and multimode source in ESI mode, atmospheric pressure chemical ionisation (APCI) mode, and combined mode using both ESI and APCI, i.e. altogether seven different ionisation modes. The lowest limits of detection (LoDs) were obtained by ESI and HESI. Widest linear ranges were observed with the conventional ESI source without heated nebuliser gas. In comparison to HESI, ESI source was significantly less affected by matrix effect. APPI ranked second (after ESI) by not being influenced by matrix effect; therefore, it would be a good alternative to ESI if low LoDs are not required.

Graphical abstract

     

Estimation of uncertainty in routine pH measurement

A procedure for estimation of measurement uncertainty of routine pH measurement (pH meter with two-point calibration, with or without automatic temperature compensation, combination glass electrode) based on the ISO method is presented. It is based on a mathematical model of pH measurement that involves nine input parameters. Altogether 14 components of uncertainty are identified and quantified. No single uncertainty estimate can be ascribed to a pH measurement procedure: the uncertainty of pH strongly depends on changes in experimental details and on the pH value itself. The uncertainty is the lowest near the isopotential point and in the center of the calibration line and can increase by a factor of 2 (depending on the details of the measurement procedure) when moving from around pH 7 to around pH 2 or 11. Therefore it is necessary to estimate the uncertainty separately for each measurement. For routine pH measurement the uncertainty cannot be significantly reduced by using more accurate standard solutions than ±0.02 pH units – the uncertainty improvement is small. A major problem in estimating the uncertainty of pH is the residual junction potential, which is almost impossible to take rigorously into account in the framework of a routine pH measurement.¹ Received: 11 August 2001 Accepted: 22 February 2002     

The role of additional solvents in transition metal complex catalyzed asymmetric reductions in ionic liquid containing systems

When ionic liquids (ILs) are employed as solvents for transition metal complex (TMC) catalyzed reductions, a second solvent can be added to increase the efficiency of the catalytic cycle and the solubility of the reactant in the IL phase. Two industrially relevant asymmetric hydrogenations, the enantioselective reductions of methyl 2-acetamidoacrylate with Rh-EtDuPHOS and methyl acetoacetate with Ru-BINAP, were performed in different catalytic systems including 1-butyl-3-methylimidazolium hexafluorophosphate/ tetrafluoroborate as ILs. Product separation and TMC recycling was performed by extracting the product from the reaction mixture. This can be accomplished by cooling the system, by adding an excess of the second solvent or by adding a third solvent. A high solubility of the second solvent in the IL catalytic phase favors the reaction activity, but can induce leaching of the IL and TMC.     

Axial dispersion in a liquid fluidized bed of particles akin to immobilized enzymes

The axial dispersion of a liquid fluidized bed of controlled pore silica (CPS) particles has been determined by the pulse tracer method. The CPS used was the same as for enzyme immobilization, having an average diameter of 0.436 mm and mean pore size of 37.5 nm. The fluidization liquid is α-amylase liquefied manioc starch, 30% w/v, 45°C pH=4.5. Nominal bed porosities tested were 0.7 and 0.8. The results show that the axial dispersion coefficient increases with greater superficial liquid velocities. Various available correlations tested disagree with each other to a large extent and are unable to represent collected experimental data.     

In Situ Amperometric Detection of Vesicles and Microgel Phases in an Aggregating System: Calcium Alginate

In situ amperometric characterization of an aggregating system in terms of molecular adsorption and single microparticle interactions at the electrode interface is demonstrated using a model system: alginate/Ca(II) in an aqueous electrolyte solution. Recording of chronoamperometric curves of oxygen reduction at the dropping mercury electrode is designed for detection of dip‐shaped signals of individual gel microparticles. By addition of Ca(II) decrease of alginate adsorption is accompanied by appearance of signals indicating vesicle type association of alginate molecules and microparticles of gel phase. AFM imaging provided evidence of initial stage in calcium alginate gel formation.     

The LOV2 domain of phototropin: a reversible photochromic switch

Light, oxygen, or voltage (LOV) domains constitute a new class of photoreceptor proteins that are sensitive to blue light through a noncovalently bound flavin chromophore. Blue-light absorption by the LOV2 domain initiates a photochemical reaction that results in formation of a long-lived covalent adduct between a cysteine and the flavin cofactor. We have applied ultrafast spectroscopy on the photoaccumulated covalent adduct state of LOV2 and find that, upon absorption of a near-UV photon by the adduct state, the covalent bond between the flavin and the cysteine is broken and the blue-light-sensitive ground state is regained on an ultrafast time scale of 100 ps. We thus demonstrate that the LOV2 domain is a reversible photochromic switch, which can be activated by blue light and deactivated by near-UV light.